XP95 Manual Call Point
Apollo’s XP95 Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allows for a quick and simple reset.
- EN54-11 ApprovedÃ‚Â (EN54-17 Approved for Isolator version)
- E-Z fit connectors
- Front facing addressing without the need to detach the backbox
- A unique, ergonomically designed key for resetting and front cover removal
- Backward compatibility and retro-fit
- Resettable element
The new Apollo XP95 EN54-11:2001 compliant Manual Call Point (MCP) is based on the KAC conventional MCP range. It is electronically and mechanically backward compatible with previous Apollo call points based on KACÃ¢â‚¬â„¢s World Series product.
The address of each call point is set at the commissioning stage by means of a seven-segment DIL switch.
A single bi-coloured alarm LED is provided on the call point. This LED is controlled, independently of the call point, by the control panel. The red LED is lit when the call point has been activated. An amber/yellow LED indicates a fault. Call points can be remotely tested from the panel by transmission of a single bit in the communications protocol.
Call points respond by providing a value of 64 which corresponds to the alarm value.
XP95 Manual Call Points are available with or without an isolator. Each version is available with a resettable element and a backbox for surface mounting as standard. If a glass is required, it is available on request. For all part numbers please refer to Table 2.
To provide additional protection against accidental operation, a transparent hinged cover with a locking tag, part number 26729-152 is available, which can be fitted to the manual call point.